Forklift Training Programs Saskatoon - Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in types of forklifts, pre-shift inspection, fuel kinds and dealing with fuels, and safe utilization of a forklift. Practical, hands-on training helps participants in acquiring essential operational skills. Course content consists of current rules governing the utilization of forklifts. Our proven forklift programs are intended to provide training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.
How to Safely Handle Loads
Do not raise or lower the fork while the forklift is traveling. A load should not extend above the backrest due to the possibility of the load sliding back in the direction of the operator. Inspect for overhead obstructions and make sure there is adequate clearance prior to lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it slightly back.
When the load is raised the forklift will be less steady. Make certain that no pedestrians cross underneath the elevated fork. The operator must never leave the forklift when the load is lifted.
When handling pallets, forks must be high and level enough to go into the pallet and extend all the way beneath the load. The width of the forks must provide equal weight distribution.
Prior to unloading or loading the truck, chock the wheels and set the brakes. Floors must be strong enough to support the weight of the load and the forklift combined. Fixed jacks could be installed in order to support a semi-trailer which is not coupled to a tractor. The height of the entrance door should clear the height of the forklift by a minimum of 5 cm. Edges of docks, rail cars and ramps should be marked and avoid them.
Do not stay inside a forklift for long periods without correct ventilation. The interior of the truck should be well lighted and free of trash, loose objects and obstructions. Inspect for holes in the floor. The installation of material which are non-slip on the floor will help avoid slipping. Clear whichever obstructions from dockplates and docks and make sure surfaces are not wet or oily.
Lift trucks should not be used to tow or push other forklifts.