Forklift Training Schools Saskatoon - Forklift Training Schools - For The Safety Of Your Workers
Are you searching for work as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in types of forklifts, pre-shift inspection, fuel types and handling of fuels, and safe operation of a forklift. Hands-on, practical training assists people participating in acquiring fundamental operational skills. Course content comprises existing regulations governing the utilization of lift trucks. Our proven forklift courses are meant to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.
Whilst the lift truck is in operation, do not lower or raise the forks. Loads must not extend higher than the backrest. This is due to the possibility of the load sliding back in the direction of the operator. Check for overhead obstacles and ensure there is enough clearance before raising a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.
When the load is lifted the forklift would be less stable. Make certain that no pedestrians cross below the elevated fork. The operator should never leave the lift truck when the load is raised.
When handling pallets, forks should be high and level enough to go into the pallet and extend all the way beneath the load. The width of the forks must provide equal weight distribution.
Before unloading or loading the truck, chock the wheels and set the brakes. Floors need to be strong enough to support the weight of the load and the forklift combined. Fixed jacks could be installed to support a semi-trailer which is not attached to a tractor. The entrance door height must clear the forklift height by at least 5 cm. Edges of docks, rail cars and ramps should be marked and avoid them.